AdventistSat GEOSATpro DVR1000ci Przewodnik Instalacji Pobierz pdf (Strona 18)

Attach the LNBF Arm to the Elevation

Bracket. Assemble the Elevation

Bracket and Post Clamp. Most

installations in the US and Canada will

use Elevation Scale A type assembly.

Mexico installations will usually use

Elevation Scale B assembly.

The Post Clamp has two holes drilled. One hole is stamped with an

A and the other with a B. Assemble the Elevation Bracket to the Post

Clamp using either the hole stamped A if the Dish Elevation Angle is

between 20 - 50 degrees or the hole stamped B if the elevation angle

is 50 – 90 degrees. The dish has been

correctly assembled for Measuring the

Dish Elevation Angle using the A Scale

if an upside letter B is visible stamped on

the Post Clamp. If an upside down letter

A is visible on the Post Clamp, the dish

has been assembled to use Scale B for

measuring the Elevation Angle.

US and Canada

Mexico

After verifying the reector is not

warped, mount to the Elevation

Bracket.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 38 39

Brak uwag

AdventistSat GEOSATpro DVR1000ci Przewodnik Instalacji Strona 18